Bluetooth Adapter Bed

How to assemble a single actuator system for comfort beds without Integrated Controller

A system consists of:

• Single actuator(s)
• 1 x Switch Mode Power Supply
• 1 x CBH Advanced
• 1 x Bluetooth^® hand control
• 1 x Bluetooth^® Adapter

1. Connect single actuators in channels 1-2 to control adjustment of, for example, backrest and leg support. (With the 3-channel CBH Advanced; the 3rd channel can also be used for an actuator)
2. Plug the DC cable into the CBH Advanced
3. Plug the Bluetooth^® Adapter into the CBH Advanced
4. Connect to the mains
5. Pair the hand control (press the two top buttons simultaneously)
6. The system is now ready for setup

To watch our videos, please accept the marketing cookies

How to assemble a single actuator system

The system consists of:
Single actuator(s)
Massage motor(s)
1 x Switch Mode Power Supply
1 x CBH Advanced
1 x Bluetooth^® hand control
1 x Bluetooth^® Adapter

1. Connect single actuators in channels 1-2 for back and leg adjustment
2. Connect massage motors in channels 3A and 3B
3. Plug the 2-pole DC cable into the CBH Advanced
4. Connect the other end of the cable to the SMPS and connect the mains cable
5. Connect to the mains
6. Plug the Bluetooth^® Adapter into the CBH Advanced
7. Pair the hand control
8. The system is now paired and ready for use

To watch our videos, please accept the marketing cookies

How to pair hand controls with a system with a CBH Advanced and a Bluetooth^® Adapter

1. Connect to the mains 
2. Bluetooth^® Adapter flashes for three minutes to indicate pairing mode
3. To pair a hand control, press the two top buttons while the adapter is flashing
4. A long flash indicates successful pairing
5. All LINAK hand controls are paired by pressing the two top buttons

How to pair a hand control later

1. Start pairing mode again
2. Unplug from the mains and wait for ten seconds
3. Connect to the mains
4. Bluetooth^® Adapter flashes for three minutes to indicate pairing mode
5. Repeat pairing procedure on the other hand control
6. The system is now paired and ready to use

To watch our videos, please accept the marketing cookies

How to pair the Bed Control™ App to a CBH Advanced system

1. Locate and download the Bed Control™ App in the App stores
2. Open the Bed Control™ App
3. Make certain that your system is in pairing mode
4. Choose your bed in the list and connect
5. A long flash indicates successful pairing
6. Start the onboarding flow
7. Choose the features of your bed to complete the setup
8. The system is now paired and ready for use
9. Wait for five seconds between controlling your bed with different hand control options

To watch our videos, please accept the marketing cookies

1. Plug the Bluetooth Adapter into the powered TD3.
2. The Adapter is now in pairing mode. A blue blinking LED will indicate this.
3. Press the "Back Up" and "Down" buttons on the Bluetooth hand control at the same time. Now the light will blink for longer to indicate that the control and the actuator are paired.