The DP (desk panel) is a classic control developed to adjust all kinds of desks ranging from
heavy duty workstations to
office desks.
The DP is compact in design and easy to mount under various types of
height adjustable desks. The DP can control up to 3 columns/actuators independently.
Optionally it can be ordered in a memory version or in a memory and display version allowing you to store favourite positions.
2D drawing
3D models are available in the below formats:
- The desk does not drive at all
- The desk can only drive downwards
- How to store a memory position
- The desk will not drive the full stroke upwards. Always stops in the same position
Check:
Is the mains connected to the control box?
Try/Solution:
Try to connect a lamp or similar to the mains supply to check that the supply voltage is OK.
Check:
Are all plugs mounted correctly in the control box and to the leg?
Try/Solution:
Check all connections.
Check:
Are there any visible damages on cables, controls, the control box or legs?
Try/Solution:
Damaged parts must be exchanged – contact the company where you bought your desk.
Back to top.
Back to top.
- Favourite positions e.g. for sitting and/or standing can be stored. Follow the procedure shown in the video or in the text below.
How to store a position
How to store:
1. Drive to the height you wish to store
2. Press ‘S’ and then the memory button
Your position has now been stored
To recall your memory position, press the memory button until you reach the stored position.
- Download above video: How to store a position (21Mb .wmv-file)
Back to top.
- The system has set a new end-stop outwards. To erase this position, the desk must be initialised again. Follow the procedure shown in the video: How to initialise your desk.
Back to top.
YouTube video - "How to initialise your desk":
How to initialise your desk
The desk cannot drive up if it has not been initialised
If display: error code E01
How to initialise:
1. Press down key and drive to the lowest position.
Hold the key until the desk stops completely
2. Reactivate the down key and hold the key until the desk stops completely.
Now the desk can drive up.
- Download above video: How to initialise your desk (16Mb .wmv-file)
Back to top.
For further information please see the
DESKLINE User Manuals.