The compact design and mounting friendliness of the DPB makes it an optimum choice of desk panel for
height adjustable desks where only up and down functions are required.
The raised up and down buttons shaped as arrowheads make the panel very intuitive to use.
The panel is compatible with all
DESKLINE® control boxes. As an option the DPB can be mounted in a drawer, so when not in use the panel can be hidden under the desk and blend perfectly into the desk design.
2D drawing
3D models are available in the below formats:
- The desk does not drive at all
- The desk can only drive downwards
- The desk will not drive the full stroke upwards. Always stops in the same position
Check:
Is the mains connected to the control box?
Try/Solution:
Try to connect a lamp or similar to the mains supply to check that the supply voltage is OK.
Check:
Are all plugs mounted correctly in the control box and to the leg?
Try/Solution:
Check all connections.
Check:
Are there any visible damages on cables, controls, the control box or legs?
Try/Solution:
Damaged parts must be exchanged – contact the company where you bought your desk.
Back to top.
Back to top.
- The system has set a new end-stop outwards. To erase this position, the desk must be initialised again. Follow the procedure shown in the video: How to initialise your desk.
Back to top.
YouTube video - "How to initialise your desk":
How to initialise your desk
The desk cannot drive up if it has not been initialised
If display: error code E01
How to initialise:
1. Press down key and drive to the lowest position.
Hold the key until the desk stops completely
2. Reactivate the down key and hold the key until the desk stops completely.
Now the desk can drive up.
- Download above video: How to initialise your desk (16Mb .wmv-file)
Back to top.
For further information please see the
DESKLINE User Manuals.